The Best Way to Sterilise an Electric Razor

By Charlie Harper | Guides

Aug 09

It is most desirable to experience a razor-bump-free and smooth shave, which can consequently be achieved with the use of a sterile razor. Some of the electric razors in the market come with their own built-in sterilisation systems that save you the much trouble of having to sterilise and disinfect them. Others may, however, demand your time, to ensure that they are clean and ready for every use.

The most common quick alternative to wet shaving is zipping the electric razor, though it has to be taken into account that an electric razor is not disposable after a few uses as the others. It does not immediately get tossed into the trash or the bin. They have to undergo sterilisation in order to remove hair build up, bacteria, solid particles, dust and dead skin.

The Importance of Razor Sterilization

Undesirable deposits accumulate on the blades of the electric razor, hence the need for sterilisation and disinfection, which ensure that the bacteria are not spread on the surface of the skin. The blades are similarly able to function smoothly and more efficiently once they have been unclogged from the dirt.

What to Use for a Successful Sterilisation Procedure

Some of the things you will need to undertake a successful sterilisation of an electric razor include pure clean water, rubbing alcohol, cloth or a cotton wool (though this will be considered optional) and a small nylon bristle brush.

The initial stages in the sterilisation involve switching the razor off and unplugging it from the main electric source supply.

It can be dangerous to perform sterilisation while the razor is plugged or connected to the electric sockets. Serious cases of electrocution have been reported before. The steps include:

  1. Remove the razor-head from the main body of the razor. There are a number of steps to be taken to successfully remove the head. One should refer to the user’s manual and guide, since they tend to vary from one developer to another, depending on the electric razor’s market model.
  2. The next step you ought to take is to brush the loose hairs from the blades as well as the head, using a cleaning brush or most alternatively toothbrush. The cleaning brush has to come with the razor during purchase. Remember that the screen is very fragile, so avoid brushing it directly and with force. It can easily get damaged, which reduces its lifespan.
  3. Expose the cutter in order to open the shaving unit of the razor. It is usually located under the screen. There are instructions on the manual on how to expose the cutter. Brush off the cutter, a step which will assist you to remove the loose hair from the surfaces of the machine.
  4. Use Isopropyl alcohol to moisten the cotton pad. Wipe each of the blades so carefully with an alcohol pad, while replacing each dirty pad with a clean one.
  5. Wipe down the cutter with a clean cotton pad, moistened similarly with isopropyl alcohol.
  6. The last stages involve wiping the underside of the razor head with cotton-soaked pad(has to be clean), use it to wipe down the cutter.

Air-dry the razor and the razor head by sitting them on a clean towel before you re-assemble all the parts of the electric blade once more.

Things to Remember When Sterilising a Razor

  1. Always adhere to the rules as provided in the manuals and the purchase instructions. They help in the processes of removing the foil part of the razor and gives prescriptions on how to squeeze the sides of the blades.
  2. Remember to stick to the use of the toothbrush or the nylon brush which comes with the electric razor during purchase.
  3. Pour or run water on the waterproof models in order to remove any hairs, whereas use a damp cloth on the non-waterproof models to wipe down the cutter.
  4. Always pour a small amount of rubbing alcohol on the razor and do it mix it with the others. Set it aside always. Alcohol evaporates so easily and hence will not hurt a non-waterproof razor.

About the Author

Leave a Comment:

Leave a Comment: